Ninja® Hot and Cold Brew System™ CP307C

“Add” “Wtr”

• The system does not have enough water in the reservoir to complete your brew. Add fresh water to the reservoir and then press the START/DÉMARRER dial to resume.

“CLn”

• The system has detected that a clean cycle needs be run immediately to remove calcium scale buildup in the boiler. See ‘Cleaning & Descaling Your Brewing System’ for instructions.

“Hot” “Wtr”

• The system has detected that hot water has been added to the water reservoir. Remove the reservoir and empty the hot water. Refill the reservoir with fresh, cool water and return it to the base of the system. Wait until the display no longer shows “Hot” “Wtr” before using the system again.

Error messages:

“Er”

• If the clock displays “Er” and then a number (ex. “Er 03”), contact Customer Service at 1-855-520-7816.

Use the Herbal tea setting for Rooibos and the Black tea setting for Pu’erh.

Run a clean cycle. If you have recently completed a clean cycle, you may need to run a second cycle to remove additional mineral buildup that occurs naturally over time.

• After removing the water reservoir, there may be a small amount of water in the reservoir valve. This can be easily removed with a dry cloth.

• If the leak is coming from the brew basket, make sure all parts are assembled correctly and securely. If the leak is coming from the bottom of the brewer, call Customer Service at 1-855-520-7816.

The water reservoir markings are minimum fill lines that indicate the amount of water needed for that brew size. However, all brew styles use different amounts of water to create the proper flavor and concentration, leaving some water to remain.

NOTE: When using a paper filter, do not use the permanent filter

The bottom of the filter holder may be clogged. This can happen with fine ground coffee or too many coffee grinds in the brew basket. Medium-ground coffee is recommended.

Ensure you are using at least a 355 ml cup for the Cup size, 414 ml cup for the XL Cup size, 473 ml travel mug for the Travel Mug size, and 591 ml travel mug for the XL Multi-Serve size.

Depending on your settings, your brew time will vary from around 4 minutes to 18 minutes. The progress bar on the control panel will indicate brew status.

• COFFEE: For milder coffee, use the CLASSIC brew setting, use lighter roast beans, or use a paper filter rather than the permanent filter. If you want an even milder flavor, you can put fewer coffee grinds in the brew basket.

• TEA: For milder tea, use the CLASSIC brew setting, or use less tea in the brew basket.

• COFFEE: For stronger coffee, use the RICH brew setting, try darker roast beans, or use the permanent filter rather than a paper filter. If you want an even bolder flavor, you can add more coffee grinds to the brew basket. Additional grinds do absorb liquid, so you will have a more concentrated, smaller cup of coffee
• TEA: For stronger tea, use the RICH brew setting, or add more tea to the brew basket.

Ensure your cup, travel mug, or carafe is filled all the way to the top with ice cubes before brewing. Your Ninja Hot & Cold Brew System™ will brew at elevated temperatures to lock in the best flavor, then the ice will cool the brewed coffee or tea to the perfect temperature.

• If using a permanent filter, the sediment at the bottom of the brewed coffee may be due to using finely ground coffee

• To reduce the amount of sediment in the brewed coffee, use a slightly coarser grind or use a paper filter

NOTE: We DO NOT Recommended using a paper filter in conjunction with the permanent filter, as clogging and backing up of water and/or coffee in the filter basket can occur.